RecondOil - Turning waste into profit!

Cutting Edge Technology for the Circular Use of Oil - Use the same oil time and time again!

40 million tons of oil are used every year, and most of this oil is only used once. It’s an inefficient and environmentally disastrous way of using a valuable, non-renewable research. RecondOil’s patented Double Separation Technology(DSP) enables circular recovery of oil and the reuse of industrial oils with its original properties.

New Technology Creating New Business Models

With the reuse of oil, new opportunities emerge. We change our models of business, since the regeneration of oil means it can be rented and used over and over. It’s simple, smart, and environmentally friendly.

Two Business Arenas

We are a two front business. With ROCCO Oil and ​ROCCO Slop we sell complete processing plants for oil and in-line solutions for businesses.

• Climate smart and sustainable oil use
• World-class, cutting edge technologies
• Strong references and networks
• A competitor in the global marketplace and completely scalable technology

Technology Platform: Double Separation Technology, or DST

DST is a revolutionary technology, which provides an opportunity for world changing potential in the way that we use, sell, and distribute a wide variety of oils. Through DST, an oil can be purified to nanomolecural size while still allowing the properties of specialized additives. A true, circular use of oil.

DST allows for a nearly infinite extension of an oil’s practical use.

Oils get dirty while they’re being used, collecting particles and debris as it does its job. There are many filtration solutions out there for those who look for them, but practically all of them have the same major drawback: removing particles smaller than one micron or having the same density as the oil itself is nearly impossible using traditional methods.

Many of these particles become oxidized as they pass through the filter. Dirt, metal, and soot cause the oil to thicken and become less useful. Eventually the oil reaches a point past that of practicality and can no longer used, which means it will have to be discarded.

DST

This is exactly where DST technology can come into play in our hopes for a more viable alternative to purify and reuse oil. Based on biotechnology developed by our chemists and processing engineers, particles and other impurities down to nano-sizing can be captured and separated from the oil in our ROCCO modules.

Performance tested in the real world as well, DST has shown itself as effective in practice. When DST is use, it’s shown a particulate matter reduction down by 90-99% when measured against the ISO code, which is the international standard for oil. For very small particles, those less than <0.2 micron for instance. In quantities of copper at this level, for instance, we have measure 92% of reduction while competing products show 0%.

Pure oil does not age, since the small amounts of water and oxidative materials found present are gone. The reason for oxidation, the accumulation of these small particles, is remedied through DST treatment and the oil can be reused again for its original purpose.

Cooperation with Leading Oil Companies

We already cooperate with some of the leading European oil companies and we have several joint development projects already aimed at the sustainable use of oil.

The additive in the oils remains intact, which is a prerequisite for the oil to be used time and time again. Through our partnerships with “oil formulators” and oil companies, we have been able to show that the additives normally included in different formulas can be retained through use of DST treatment. If necessary, these can be continuously peeled after a treatment to continuously obtain the original properties of the oil.

Our own laboratory is in constant development. Recondoil contionously works to clean and regenerate all types of oils. We also conduct specific investigations to meet individual client’s specific needs.

IPR

At present, we have 2 patents granted. An additional 4 are under grant and ongoing work is being done to build a subsequent IPR portfolio. In addition to the work itself, there’s a great deal of unique knowledge about oils and the DST process with advanced testing using the latest methods. RecondOil has also developed 3 different complete processing plants along with the associated source codes for the automation process.