Cut Carbon Footprint For Your Oil Use With Up To 90%
We give users of industrial lubricants over the world a chance to use oil in a sustainable and circular way.
1 ton of regenerated oil cuts the carbon footprint with up to 3 ton of CO2 emission every time it is recirculated. Today there are DST treated oils that are circulated 30 times!
Technology Platform: Double Separation Technology, or DST
DST is a revolutionary technology, which provides an opportunity for world changing potential in the way that we use, sell, and distribute a wide variety of oils. Through DST, an oil can be purified to nanomolecural size while still allowing the properties of specialized additives. A true, circular use of oil.
DST allows for a nearly infinite extension of an oil’s practical use.
Oils get dirty while they’re being used, collecting particles and debris as it does its job. There are many filtration solutions out there for those who look for them, but practically all of them have the same major drawback: removing particles smaller than one micron or having the same density as the oil itself is nearly impossible using traditional methods.
Many of these particles become oxidized as they pass through the filter. Dirt, metal, and soot cause the oil to thicken and become less useful. Eventually the oil reaches a point past that of practicality and can no longer used, which means it will have to be discarded.
This is exactly where DST technology can help, our solution to purify oils to allow it to be re-used again and again. Based on biotechnology developed by our chemists and processing engineers, particles and other impurities down to nano-sizing can be captured and separated from the oil in our modules.
Performance tested in the real world as well, DST has shown itself as effective in practice. When DST is use, it’s shown a particulate matter reduction down by 90-99% when measured against the ISO code, which is the international standard for oil. For very small particles, those less than <0.2 micron for instance. In quantities of copper at this level, for instance, we have measure 92% of reduction while competing products show 0%.
Pure oil does not age, since the small amounts of water and oxidative materials found present are gone. The reason for oxidation, the accumulation of these small particles, is remedied through DST treatment and the oil can be reused again for its original purpose.
The additive in the oils remains intact, which is a prerequisite for the oil to be used time and time again. Through our partnerships with “oil formulators” and oil companies, we have been able to show that the additives normally included in different formulas can be retained through the DST treatment. If necessary, these can be continuously peeled after a treatment to continuously obtain the original properties of the oil.
Our own laboratory is in constant development. Recondoil contionously works to clean and regenerate all types of oils. We also conduct specific investigations to meet individual client’s specific needs.